Test print for the Fusion Overload Canister Puzzle.
The model is error free and slices well - despite some warnings in Prusa Slicer.
This model is designed to be printed on FDM/FFF 3D Printers and was tested on an ender 3.
Recommended Settings:
PLA Recommended
0.15mm Layer Heights
3 Perimeters
4 Bottom, 5 Top Solid Layers
15% Cubic Infill (or similar)
NO Supports
NO Brim
Parts MUST freely separate after printing and move smoothly. If force is required, the real puzzle will not work.