Print both models at 0.15mm layer height with 2 to 3 perimeters with a 0.4mm nozzle. Recommended to use a 6mm brim for both the case and board to assist in adhesion. Board components MUST be grouped / combined to prevent the slicer moving them and ruining the model.

UPDATED VERSION USES 17x 12mm D6 Dice (MUCH EASIER TO FIND)

You will also need 17x 10mm D6 dice - these are cheap https://s.click.aliexpress.com/e/_DC2sAHR

Detailed printing instructions available in the video here - https://youtu.be/kPLRX0LjzWs?si=uu5NrwmeIiFb001l

Each player takes turns rolling one D6 and placing it into one of their 3 columns. The dice are added up and the goal is to have the highest score by the end of the game (when one player fills all 9 spots).

Multiple die of the same number in the same column are added together and then multiplied by the quantity in that column (ie, two 6's becomes (6+6)X2 = 24.

However, your opponent may place a dice of the same number in their opposing column and remove all yours of the same number!

Like the game? Check out Cult of the Lamb! https://www.cultofthelamb.com/